How to Sew Your Own Washable Face Masks – Bitcoin Value
Sewing Tutorials

How to Sew Your Own Washable Face Masks

How to Sew Your Own Washable Face Masks



Sharing is caring!

161445 shares Share



Updated July 2020: Since this post was first published, face masks have become a part of daily life. I have had the privilege of making roughly 1,000 of them as of right now. Please know that I am always committed to providing you with the most updated information available. As a result, I will be revisiting this and other applicable posts often to reflect the latest knowledge. You can also find child-size patterns Easy Sew Washable Masks for Children.


Even though I wore face masks on a daily basis in my healthcare profession, I never really thought I might need one at home. Well, except for sanding down a DIY project or enameling in my jewelry shop. And like pretty much everyone else, when we were first advised to start wearing masks they were impossible to find anywhere.

So I decided to do what I always do and that is to DIY washable facemasks. The problem was that I couldn’t really find a pattern that was easy to sew, comfortable to wear, and met the recommended guidelines. Those guidelines include two layers of fabric with a filter. I knew that I could definitely design my own pattern based on all of those criteria coupled with my experience in healthcare.

The trick was to make it all as fast and easy as possible. Because, who wants to spend all this time behind a sewing machine?

The pattern you see here is the result of much trial and error. In the end, I opted for a mask pattern that consists of one piece of fabric and requires only straight-line sewing. It can easily be adapted for use with straps if elastic ribbon is either not available or not desirable. And while contoured masks look great, they lack the adjustability and ease of sewing I was aiming for.

Before I proceed, I would like to stress that I am in no way claiming that a washable face mask will protect you like an N95 respirator mask. But since their use is essentially limited to medical personnel, a protective cloth face-covering like this triple layer washable mask is a good option for personal use. As a matter of fact, some hospitals were asking private citizens to sew face masks to prevent the depletion of N95 mask supplies.


As I mentioned, I worked in the healthcare profession for many years. And during those years I wore many different types of masks. A comfortable fit is as important as filtration. If your mask doesn’t fit well, you will be less likely to wear it. Most medical masks are available in two variations: one with elastic loops, the other with ties. This mask pattern will work with either. The choice is entirely up to you.

basic MASK pattern design

While researching this DIY project, one thing stood out: a mask should have more than one layer, even if it is made from tightly woven fabric.

That is why I concentrated on creating a mask that has three layers, two fabric layers with a removable center (filter) layer. From what I was able to gather on information, the recommendation is that the center layer should consist of something that is not woven, like a dense type of batting, heavyweight t-shirt fabric, even folded paper towels. All will work just fine with my design as you will see.

And third, I concentrated on creating a pattern that is easy to sew with relative beginner skills. You shouldn’t need to be a seamstress to accomplish sewing your own face masks. With my pattern, you need one rectangular piece of fabric and if you know how to sew a straight line, you are good to go.

Best materials for face masks

The next important consideration was the type of fabric. That choice turned out to be relatively easy. Cotton is breathable, comfortable to wear, can be washed in hot water, and is readily available. 300 thread count 100% cotton sheets are a great option.

They are readily available and very affordable. You may even have some on hand already. Or use one of the many fun patterns available at the fabric store and create your masks to match any outfit or taste!

If you prefer to purchase my ready-made masks instead, you can find a variety of colors and patterns in my Etsy shop. Shipping within the US is FREE and new patterns are added regularly.

You can find FREE printable instructions including a way to make these masks with ties instead of elastic and lots of other valuable info in the Resource Library. Just sign up here!

This post contains affiliate links. You can view the entire affiliate link policy here.


Tips: For this purpose I found cotton quilting fabric to be ideal. You can buy it by the yard or in color-coordinated “fat stacks” with each piece of fabric measuring about 21×18 inches. This makes cutting fabric to size super easy. If you plan on making a number of masks, 300 thread count cotton sheets are an ideal choice. It is soft and breathable and can be found in many colors.

If you are using patterned fabric stick to a pattern that can be used in any direction. This makes cutting and sewing much easier and faster.

Braided 1/4 inch elastic is already in short supply. If you can’t find any elastic right now, don’t despair! You can make these masks with coordinated cotton ties. You can find instructions to do that in the complete PDF in the FREE Resource Library.


sewing machine (use a needle suited for heavier fabric)

sharp scissors

rotary cutter and self-healing mat

large quilting ruler

iron, ironing board


Tips: While a rotary cutter and self-healing mat are not absolute must-haves, I highly recommend both. It makes cutting fast and accurate especially when combined with a quilting ruler. And both are great tools to combat hand fatigue.

step by step Instructions for Sewing Face Masks

Cut the fabric so it measures 16″ x 10″ (approximately 40 cm x 25 cm)

Press flat, then fold in half horizontally. It should now be 8″ x 10″ (20 cm x 25 cm)

Press the fold and open back up

On either side of the pressed fold measure 2″ (5 cm)

From the 2″ (5 cm) mark, fold the fabric so it lines up with the pressed center line, repeat with the other side

Press folds in place and pin

Double Roll and press hems (1/4″ or 0.5 cm) on both ends in place, pin if needed (I have found that it is not really necessary if pressed well).

Stitch over centerfolds with a 1/4″ or 0.5 cm seam allowance on both sides to hold in place

Stitch hems

Press entire piece to set hems

Now roll in both sides about 1/2 inch 1.2 cm and press into place

Fold each end in towards the middle so they overlap slightly (check the front, the fold should be in the center

make sure the pressed seams stay aligned

with the opening facing up, place the end of elastic or fabric tie, align and roll so the tie is covered

stitch into place (back-stitch to secure) continue stitching until 1″ (2.5 cm) from the other side

insert the other end of your elastic or the second fabric tie, roll and secure like the first

repeat on the other side


Begin by measuring and cutting your fabric. I used plain fabric here so you can see and follow each step clearly.

Fold the cut piece in half horizontally and press the centerfold as a reference mark.

Create about a 1″ – 2.5 cm fold on each side of the centerfold, press and pin in place.

Here is what the pleat looks like from the back (wrong side of the fabric):

Next roll and press the seams at each end over 1/4″ 0.5 cm

Stitch in place. If you press the seams down well, you shouldn’t have to pin. The seam is about the same width as the pressor foot, which makes sewing down the center much easier.

TIP: Before pinning, flip the mask over to make sure the centerfold is actally in the center! If you prefer not to pin, press the entire piece well before the final sewing step.

Inserting the elastic as shown and rolling it over gives the finished mask better fit.

Stitch the elastic ribbon in place and anchor with backstitches. You want them to be very securely in place. Test by pulling on them.

Repeat on the other side. Make sure the elastic ribbon is not twisted!

Pat yourself on the back, you just made a washable face mask!

The finished mask using the measurements above should be 9″ (22 cm) by 4 – 4 1/2″ (10 – 11.3 cm). You may need to adjust your measurements to fit your needs. To create smaller sizes be sure to check out my post on how to make child-size masks.

As I mentioned above, I designed this pattern with a center layer in mind that acts as an additional filter. Thin cotton batting or 100% cotton heavy t-shirt fabric cut to size works well, as do non-stick sterile pads. But if those are in short supply, there is another perfect solution for liners. Bear with me here: unscented organic cotton panty liners. They are perfect! Cheap, readily available, right size and their adhesive strip allows them to stay put. If you are use liners, make sure you do so with the plastic layer facing out towards the front. Be sure to change them daily!

When you need to wash your face mask, remove the center insert and either discard (if you used non-stick sterile pads) or wash the quilt batting liners in a separate garment bag for delicates. That keeps them neatly together so you don’t have to root through the washer and dryer to find them again.

Each member of your family should have 2-3 masks as they need to be washed regularly. This pattern works well for most adults. Again, if you need to make masks for your children you can find my children’s mask instructions in this post. Full instructions and measurements can be found in the FREE Resource Library as well.

These masks are not only comfortable but also pretty! Choose a cute pattern and inject a little personality into what would otherwise be a fairly boring accessory.

For additional tips and tricks on how to make your face masks fit as comfortably as possible, be sure to to check out this post:


additional Face mask tips

You may notice that some types of elastic can be a little stiff and tight the first few times you wear your mask. It will relax with wear and after washing. If you don’t have elastic on hand or if you prefer ties, ribbon is a good option for ties. Insert a 16″ (40 cm) long and 1/4″ (.75 cm) wide ribbon in each corner of the mask.

For a more snug fit around the nose and chin, you can add elastic to the inside of the mask along the center edges.

Wash your masks regularly and replace the liner with a clean one daily (see options above).

Press your masks with a steam iron to sanitize them between washings and after to keep them in good shape.

The past few months have been challenging to say the least. Knowing that there is an illness lurking in the background that could strike at any moment is unnerving. Wearing a mask in public at all times is something that we can all do to make a difference. We can protect others and ourselves. It is a simple choice. Please be safe and wear yours!

If you decide to give this a try, post a picture of the finished result over in our Facebook group! Not a member yet? It is easy to join and the best way to interact and ask questions.

For other useful tips to stay healthy and safe check out these posts:




During times of shortage, the CDC recommended type of mask may not be available. Learn how to sew your own washable face masks with removable inserts for your family. Stay healthy and safe!



Back to top button

Adblock Detected

Please Close Adblock. Stay home ! Stay Safe !