Easy DIY String Light Poles Tutorial – Bitcoin Value
Patio Lights String Ideas

Easy DIY String Light Poles Tutorial


Easy DIY String Light Poles Tutorial

.

.

Install easy, removable string light poles over your patio or backyard fire pit to create beautiful ambiance! They’re quick, inexpensive, and very simple!

Watch the NEW Video Tutorial!

I asked for a patio makeover for my birthday this year, and one of the top things on my wishlist was string lights. The problem? Nothing to hang them from.

Here’s a tutorial for the quick and easy (unless you have really hard dirt) removable string light poles we put in. We put two poles in, and the whole project took about an hour.

Do you have a different setup, like a deck or a covered patio? Check out this post for more string light-hanging methods and tutorials. It covers hanging them from trees, walls, ceilings, deck railings, and pretty much anything else you could think of.

How to install string light poles.

Supplies:

String lights – we got these sturdier industrial ones . These are 48’ long, with 26 lights.

– we got these . These are 48’ long, with 26 lights. 2 ¾” galvanized electrical conduit pipes (each 10’ long)

(each 10’ long) 2 pieces of 1 1/2″ PVC pipe (each 2’ long)

(each 2’ long) post hole digger

hooks

3/4″ squeeze connectors (one for the top of each pole) Look for these in the electrical section of your hardware store.

Extension cord (We needed one to reach our outlet. You may or may not).

(We needed one to reach our outlet. You may or may not).

We wanted our poles to be at least 8’ tall to allow for the lights to swag and hang down without hitting our taller friends in the head. They’re going 2’ into the ground, thus 10’ long poles.

1. Dig the holes For the Posts.

We dug (and when I say “we” I mean Peter) each of the holes 24” deep. We placed them at the two outside corners of our patio. Update: We’ve since decided to add a 3rd pole.

2. Put the PVC pipe in the hole.

We placed one of the cut pieces of PVC pipe upright in the hole, and loosly packed the dirt back in around it. You could also use cement here if you prefer.

3. Set the metal pipe in place.

We put the pole into the slightly wider PVC pipe, and I held it in place with a vertical level while Peter packed the dirt in around the PVC pipe.

4. Cap the poles.

Once the poles were in the ground, we capped them with these 3/4″ squeeze connectors. This is just something to hold the light cord in place at the top of each pole.

We screwed three of these hooks into the siding to attach the string lights on the house side.

5. Hang the string lights.

And ” target=”_blank”>these heavy duty string lights come with the bulbs in a separate box- which is great because then you can string them without breaking anything.

Finally, we screwed the bulbs into the sockets.

And ta-dah!

You can see the rest of our One-Weekend Patio Makeover here. Interested in more outdoor lighting tips and inspiration? Check out my Outdoor Lighting 101 guide too!

Did you enjoy this post? Please share the love and pin it!

More Outdoor Living Ideas…

70 Outdoor Rugs Under $150!

Boho Porch Swings Reveal!

How to Hang String Lights: 10 Different Ways

DIY Vertical Garden

One-Weekend Patio Makeover!

Outdoor Living Room Reveal!

Patio Table Makeover!

Install easy, removable string light poles over your patio or backyard fire pit to create beautiful ambiance! They’re quick, inexpensive, and very simple!

.

.

Tags

Related Articles

Back to top button
Close
Close

Adblock Detected

Please Close Adblock. Stay home ! Stay Safe !